LTE Cellular Routers for Home and Business

USA Shipped LTE Routers

LTEFIX offers a full line of LTE routers that are stocked in and shipped from the USA.

---

NEXQ6GO-M Cellular Router

This NEXQ6GO-M cellular router is the latest GO series router and includes the pre-installed custom WiFiX version of open source GoldenOrb firmware..

The NEXQ6GO-M has a different architecture than the older WE826-T2 version. The NEXQ6GO-M uses the Qualcomm Atheros QCA9533 v2 and the older WE826-T2 used the MediaTek MT7620A chip. Even though similar in appearance, the inside is updated with components to make the 2.4GHz WiFi more stable.

There are two versions of the NEXQ6GO, the NEXQ6GO-U and the NEXQ6GO-M. This version (NEXQ6GO-M) is equipped with MHF4 pigtails for EMXXXX type cellular modems.

---

NEXQ6GO-U Cellular Router

This NEXQ6GO-U cellular router is the latest GO series router and includes the pre-installed custom WiFiX version of open source GoldenOrb firmware..

The NEXQ6GO-U has a different architecture than the older WE826-T2 version. The NEXQ6GO-U uses the Qualcomm Atheros QCA9533 V2 chip and the older WE826-T2 used the MediaTek MT7620A chip. Even though similar in appearance, the inside is updated with components to make the 2.4GHz WiFi more stable.

There are two versions of the NEXQ6GO, the NEXQ6GO-U and the NEXQ6GO-M. This version (NEXQ6GO-U) is equipped with U.FL pigtails for MCXXXX type cellular modems.

---

WG3526-P Cellular Router

This WG3526-P is a custom manufactured 4G LTE router for LTEFIX. They had it designed to accommodate dual powering options using a 110V to 12 volt 2.5A via a wall plug adapter.

The WG3526-P also features PoE (Power over Ethernet) capabilities, which makes it perfect outdoor installations. To accomplish this, you use a 48 Volt 60W-100W Gigabit Power over Ethernet POE injector which can be purchased separately.

The WG3526-P includes the following accessories:

• WiFiX version of GoldenOrb pre-installed
• 2 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed)
• 2 x 4G LTE Antennas
• 2 x 2.4GHz Antennas
• 2 x 5GHz Antennas
• 12 Volt 2.5 Amp Power Adapter
• 48V PoE onboard (PCB) power module
• 2 x Screws to mount Mini PCI-E modem or M.2 adapter
• Wall mounts, screws and lags
• Cat5e Ethernet Cable

---

All About:
LTE Routers